Fumai open single suction aluminum alloy horizontal vortex pump clean water pump
Water pump
Product Description
1,Powered by FUMAI’s strong 4-stroke engines
2, Easy maintenance and wide application
3, Full fram protection greatly reduces vibration
4, Famous for sophisticated design and excellent performance
5, Featured by easy starting, simple operation, low fuel consumption, a longer service life,low pollution, etc
Features
1,Economical Running
Equipped with FUMAI engines, FUMAI pumps assure superior combustions efficiency and minimized fuel consumption.
2,Portability
Adopted special alloy frame, largely reduced the weight and assures simple use.
3,A Wide Range
Excellent and advanced impeller ensures water supply in a wide range.
4,Durable Construction
The principal parts of each pump are reinforced for superior wear resistance and corrosion resistance.
5,Easy Maintenance
Cleaning the inside casing can be done simply by just removing a few bolts.
The gasoline engine water pump is a centrifugal pump composed of a water pump and a bracket. It has the advantages of low cost, light weight, convenient maintenance, and low manufacturing cost and low noise.
The clear water pumps are used to provide continuous supply of water to industrial, commercial establishments, houses, hospitals, aquariums, and agriculture.
Specifications
Model FMWP800
engine parameter
| Engine model 168FB | |
| Engine type | OHV25 single cylinder,Forced air cooling,4-stroke |
| EnginePower kW/RPM | 3.5/3600 |
| Ignition system | induction ignition |
| Starting system | recoil start |
| Fuel tank capacity | 3.6L |
| Oil capacity | 0.6L |
| Water pump parameter: | |
| Intel Dia | 80mm(2inch) |
| Output Dia | 80mm(2inch) |
| Lift head | 15.8m |
| Max.suction head | 5m |
| Max.flow rate | 39.6m3 /h |
| M.T mm | 520*395*420 |
| Self-priming time (s) | ≤150 |
| Cavitation allowance (m) | 4.0 |
| Net weight (kg) | 25±1 |
| G.W KG | 26 |
| Material | Aluminum Alloy Aluminum Alloy |
| Drive mode | manual |
| Use | Irrigation,extinguish a fire,Drainage |
| Pump shaft position | horizontal |
| Impeller structure | Open impeller |
| Number of impellers | Single stage |
| Impeller suction method | Single suction |
| Principle | vortex pump |
| Performance | non-blocking |
| Conveying medium | clean water pump |
Water pump maintenance instructions
the running-in period is about 5-10 hours, you have to change the oil, otherwise the impurities in the oil tank in the running-in period will jam the crankshaft .
Fill the four-stroke gasoline engine with gasoline above 90# and add lubricating oil to the tank. Please check the oil level before each use.
When the gasoline engine is working continuously, the crankcase temperature should not exceed 90 degrees. When it is overheated, it should be shut down for 15-20 minutes and then continue to work. When adding gasoline, it must be cooled down.
It is forbidden for gasoline engines to stop at high speeds, and the throttle should be lowered to the lowest speed before stopping.
Use the correct type of engine oil, clean engine lubricating oil without impurities, and gasoline without impurities.
The air filter element should be checked regularly and replaced regularly. The dirty filter element should be washed with soapy water and dried before use.
The machine is like your car, and it needs frequent care and maintenance to extend its life.
COMPANY PROFILE
Anhui Fumai Machinery Manufacturing Co., Ltd. was established in July 2020, with "only practical products, not conceptual products" as the concept, is a collection of research and development, design, production, manufacturing, sales in one of the garden machinery and equipment brand enterprises.Enterprise registered capital of 30 million yuan, covers an area of more than 150 acres, is the largest domestic garden tools manufacturers.
The company's main products are: brush cutter, chainsaw, lawn machine, hedge machine, Leaf blower, Earth auger and other high-end products.Among them, our independent research and development of four-stroke brush cutter and chainsaw products have begun mass production and put into the market.
FAQ
1.Do you accept OEM or ODM?
Answer: Yes. we accept OEM
2. Do you provide sample?
Answer: Yes, But samples fee and freight fee will charge firstly ,
and can be deducted in the mass order later.
3. what's your MOQ?
Answer: different products different MOQ, usual chain saw and brush cutter 's MOQ is 200pcs.
4. what's your delivery time?
Answer: 15-30days after order confirmation and advance payment
5. How about the packing?
Answer: Packing will do as customer 's requirement if order quantity reach 300pcs
otherwise, factory normal packing will be adopted if the order quantity less than 300pcs.
6.what certification do you have ?
Answer: for European customer , we have CE,ERUO0-V certification.
7,where is your factory
Answer:our factory is located in Hefei city ,280 miles west away from Shanghai port,China.
8,Can I mix different models in one container?
Answer:Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
9. How about the packing?
Answer: Packing will do as customer 's requirement if order quantity reach to 300pcs
factory normal packing will be adopted if the order quantity less than 300pcs.
Contact person : Dick
phone/wechat/whatsapp:+008618130035397
|
|
Fumai 3inch open impeller single suction aluminum alloy Horizontal clean water pump Images
|
